|Wireless DR||Portable X-Ray||Disinfection||Disc Publishers||Printers||Patient Safety||Literature|
|Home > Products > MoonBeam3|
MoonBeam3 Disinfection targets high-touch, high-frequency of touch surfaces.
Unique, immediately portable, truly cost-effective UVC disinfection solution.
Powerful and Fast
A practical innovation for targeted disinfection, this compact, powerful solution reduces the time required to disinfect and solves the challenge of having equipment where you need it, when you need it. MoonBeam3 is designed for fast, on-demand disinfection of high touch surfaces such as EMS vehicles, ambulances, life flight, RTA systems, bathrooms and fixtures, keyboards, monitors and the full patient bed area in the hospital setting.
MoonBeam3 has individually adjustable UVC heads, each generating a broad umbrella of intense UVC light. The articulating heads can be positioned vertically and horizontally to direct the UVC light to broad area disinfection surfaces from six inches to more than seven feet from the ground, and six feet outward. Modest cost, size and weight make MoonBeam3 a perfect addition to compact environments such as EMS vehicles and EVS carts or it can be easily hand carried to desired location.
The ability to easily adjust the heads allows maximum UVC impact for efficient cycle times starting at 90 seconds for close targets, like ambulance stretchers or workstations on wheels, to three, five and ten minutes for disinfection applications. The user-friendly interface coupled with the efficient disinfection cycle makes MoonBeam3 the ideal choice for on-demand disinfection and as part of routine cleaning procedures of high touch surfaces.
Eliminating pathogens is critical in the fight against COVID-19 and Hospital-Acquired Infections (HAIs), but there are two problematic aspects of typical disinfection technology: A) the time required to disinfect is too long, and B) the availability of the equipment â€“ itâ€™s never where you need it when you need it. MoonBeam3 addresses both! A typical disinfection cycle of 180 seconds using the three fast adjusting articulating UVC lamp heads provides thorough disinfection of the targeted surfaces. Making availability the order of the day is possible due to its lightweight, economical price, ergonomics and ease of use. These features allow Moonbeam3 units to be ready at momentâ€™s notice. As an additional benefit, the on-going maintenance of MoonBeam3 is simple â€“ no tools required bulb replacement.
Versatile and Effective
MoonBeam3 has three individually adjustable heads, each generating a broad umbrella of intense, 254 nanometer wavelength, UVC light. The articulating heads can be positioned vertically and horizontally to direct the UVC light to broad area disinfection surfaces from six inches to more than seven feet from the ground and six feet outward. This versatility allows users to position the heads in close proximity to multiple targeted surfaces allowing maximum UVC dose to be applied. Not only is MoonBeam3 highly effective itâ€™s also very efficient, boasting four selectable cycle times starting from just 90 seconds. The selection of the most appropriate cycle time is achieved through the user-friendly interface with push button simplicity (we actually recommend setting the system to 3 or 5 minutes and leaving it there as the power of the system allows these cycle lengths to be very effective). Rapid disinfection cycles and effective results make MoonBeam3 the ideal choice for on-demand disinfection and easy to integrate into routine cleaning procedures of high-touch surfaces.
Just remember the 3Ps:
Plug in. Position heads. Press start.
Thatâ€™s it! The Remote Cover is placed outside of the area where disinfection is taking place and, when not in use, houses the complete system for easy transport and storage.
Portable & Cost Effective
MoonBeam3 is immediately portable with its light weight and compact form factor, but it is the low cost, ergonomic design and efficiency that sets MoonBeam3 apart. The affordable price point makes placement on every floor or ward a practical reality. From a workflow perspective, a typical MoonBeam3 disinfection cycle is 180 seconds, introducing groundbreaking efficiency in the fight against cross-contamination and healthcare-associated infections (HAIs). This is a truly cost-effective solution, addressing the two most problematic aspects of typical disinfection technology: the time required to disinfect and the availability of the equipment. As an additional benefit, the on-going maintenance is simple â€” bulb replacement, no-tools required.
Moonbeam3 is not only highly effective, it is also incredibly safe to operate. Providing multiple levels of defense, the design reflects thoughtful, practical integration of accelerometers and infrared motion sensing plus high visibility control.
EPA & FDA registered
Manufactured per FDA and ISO 13485 QSR, FDA and EPA registered establishment.
"THE MOONBEAM3 DEVICE IS A NOVEL TECHNOLOGY THAT IS EFFECTIVE FOR SAFE AND RAPID DISINFECTION."
"MOONBEAM3 HAS BEEN VERY EFFECTIVE TO KEEP OUR EMERGENCY RESPONDERS AND PATIENTS SAFE. OUR PARAMEDICS USE CHEMICAL CLEANERS IN CONJUNCTION WITH UV-C AFTER ALL HIGH RISK TRANSPORTS TO FULLY DISINFECT VEHICLES WITHIN 15 MINUTES. BECAUSE ITâ€™S LIGHT AND PORTABLE, WE HAVE USED IT IN OUR FIRE STATION, POLICE DEPARTMENT AND DISPATCH CENTER TO IMPROVE SAFETY FOR ALL AND TO BETTER MANAGE RISKS."
"MOONBEAM3 IS A GREAT TOOL. THE UV LIGHT FINDS ALL THE SPOTS WE MISS DURING OUR MANUAL WIPE DOWNS, PLUS WE CAN FLIP THE ARMS UPSIDE DOWN TO DOSE THE CEILINGS, COMPLETELY DISINFECTING THE BACK OF AN AMBULANCE IN A MATTER OF SIX MINUTES. WE HAVE DISINFECTED WELL OVER 450 AMBULANCES AND POLICE CARS IN A THREE WEEK PERIOD. ITâ€™S REALLY HELPING TO KEEP STAFF SAFE."
Want to see how MoonBeam3 performed against live SARS-CoV-2?
Want to see how MoonBeam3 performed against live COVID-19?